|
|
Inverter 2400 Watt 24VDC/120VAC/60HZ
|
|
List: $1,200.00
Price: $1,100.00
Item Number: DR2424
Manufacturer: Xantrex
Manufacturer Part No: DR2424
|
The DR Inverter/Charger provides dependable modified sine wave power for businesses, homes and workshops. Available in 1500, 2400 or 3600 watt models, it can power most common electrical appliances such as lights, televisions, cash registers, refrigerators, washing machines, computers, and power tools. The DR’s high surge capacity gives it the ability to start difficult motor loads. Once set up, all functions of the inverter/charger are fully automatic.
Features
- Quiet, high efficiency operation
- Front panel LED indicators and adjustable switch selectors
- Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries
- Three-stage battery charging (bulk, absorption, and float) for increased performance
- Low battery, overload, and high battery, over temperature protection circuitry
- Fast switching (grid to battery and battery to grid) for backup power
- Low idle current (less than one watt) conserves energy when no loads are present
- Generator compatible
Options
- Remote battery temperature sensor (BTS) increases battery performance and life
- Remote control and status indicator (RC8) allows you to view system status remotely
- Side mount conduit box (DRCB) makes code-compliant DC wiring connections convenient
- DRI stacking interface for 120/240 volt operation. Requires two units
| |
Electrical Specifications |
| |
AC Input Voltage |
|
120 VAC |
| |
AC Input Low Transfer Voltage |
|
40-105 VAC |
| |
AC Input Current |
|
55 amps AC - 30 amps AC pass through and 25 amps AC charging |
| |
Continuous Power (@ 25 °C) |
|
2400 VA |
| |
Efficiency (peak) |
|
95% |
| |
Output Voltage (RMS) |
|
120 VAC |
| |
Maximum Output Voltage Regulation |
|
+/- 5% |
| |
Frequency (nominal) |
|
60 Hz |
| |
Continous Output (@ 25°C) |
|
20 amps AC |
| |
5 Sec Rating Surge Capability |
|
6200 watts |
| |
1 mSec Surge Capability |
|
80 amps AC |
| |
100 mSec Surge Capability |
|
58 amps AC |
| |
Automatic Transfer Relay |
|
30 amps |
| |
DC Input Voltage (nominal) |
|
25.2 VDC |
| |
DC Input Voltage Range |
|
21.6-31 VDC |
| |
DC Current at Rated Power |
|
140 amps DC |
| |
Short circuit current |
|
560 amps DC |
| |
Idle Consumption (typical at full voltage) |
|
< 12 watts |
| |
Search Mode Consumption |
|
< 1 watt |
| |
Low Battery Protection (enabled) |
|
22 VDC |
| |
Maximum Charge Rate (adjustable) |
|
70 amps DC |
| |
Waveform |
|
Modified Sine Wave |
| |
Load Sensing (inverter mode) |
|
Adjustable 5 to over 100 watts |
| |
Power Factor (allowed) |
|
0.5 to 1.0 pf |
| |
General Specifications |
| |
Specified Temperature Range |
|
32 °F to 104 °F (0 °C to 40 °C) |
| |
Enclosure Type |
|
Indoor, ventilated, steel chassis with powder coat finish |
| |
Unit Weight |
|
40 lb (19 kg) |
| |
Shipping |
|
44 (20 kg) |
| |
Dimensions (H x W x D) |
|
8.5 x 22 x 7.25" (21.6 x 55.9 x 18.4 cm) |
| |
Shipping Dimensions (H x W x D) |
|
13 x 25 x 12" (33 x 63.5 x 18.4 cm) |
| |
Mounting |
|
Horizontal wall mount |
| |
Warranty |
|
2 years |
| |
Part Numbers |
|
DR2424 |
| |
|
|
DRI - optional, stacking interface cable |
| |
|
|
DRCB - optional, conduit box |
| |
|
|
RC8 - optional, remote |
| |
|
|
BTS - optional, battery temperature sensor |
| |
Features & Options |
| |
Forced Air Cooling |
|
Standard forced air variable speed fan |
| |
Charging Profiles |
|
Eight standard with two equalize profiles |
| |
Three-stage Charging |
|
Standard three-stage (bulk, absorption, and float) |
| |
Series Stacking Operation |
|
Standard for 120 VAC 60 Hz units only - Requires two units |
| |
Battery Temperature Sensor |
|
BTS - optional remote battery temperature sensor for increased battery performance |
| |
Remote Control |
|
RC8 - optional remote control and status indicator |
| |
Stacking Interface |
|
DRI - optional stacking interface cable for 120/240 VAC 60 Hz applications |
| |
Conduit Box |
|
DRCB - optional side mount conduit box for code-compliant DC wiring connections |
| |
Regulatory Approvals |
| |
ETL Listed to UL 1741 and CSA 22.2 No 107.1 Standards |
| |
| Note: Specifications subject to change without notice. |
| To compare models, please download the Product Data Sheet. |
|
|
|