Battery Chargers : Truecharge 10

Smart, Multi-Stage Battery Charger

Truecharge 10 is a 10 amp continuous-duty charger ideal for deep cycle batteries when recharging from a source between 90-135 VAC. Truecharge 10 incorporates microprocessor-controlled advanced switching technology, which results in a light, compact design that is easy to install. Using a three-stage sequence, Truecharge 10 delivers an accurate charge every time - even when the incoming voltage is from a poorly regulated AC source. By monitoring charging voltage, current, and time, Truecharge 10 can make a smart decision about when to stop charging. Truecharge 10 can be configured for various battery types to charge safely and effectively.

Truecharge 10 will automatically check the condition of your batteries every 21 days and top them up when necessary. Built to last, Truecharge battery chargers are housed in a rugged aluminum chassis and use conformal-coated circuit boards.

Battery Chargers : Truecharge 10 Features

Microprocessor-Controlled

The battery charger's accurate delivery of the microprocessor-controlled, three-stage charge reduces the risk of overcharged or boiled batteries.

Automatic safe shutdown

Automatic safe shutdown

Filtered DC Output

Truecharge 10's filtered DC output reduces ripple, interference and noise and helps prolong the life of the batteries.

Wide AC Input Voltage Range

The battery charger is able to handle a wide AC input voltage range, from 90 to 135 volts AC at 50/60 Hz.

Battery Chargers : Truecharge 10 Specifications

Specifications

Model
Truecharge 10

Part Number
804-0100

Electrical Specifications

Output Current (bulk charge)
10 amps continuous duty

Input Voltage Range
90 - 135 VAC, 50/60 Hz (Truecharge 10i)

Output Voltage

Charge (flooded/gel)

Float (flooded/gel)
(*Normal, Depending on Settings)

13.8 - 14.8 VDC*

13.1 - 14.2 VDC*

Charger efficiency
approximately 82%

Recommended battery type
flooded or gel

Recommended battery size
12 V lead-acid batteries, 25Ah to 200Ah

Mechanical Specifications

Battery connections
clip leads

Weight
3.5 lbs.

1.6 kg.

Dimensions (L x W x H)
7.5 x 6.75 x 2.75"

19 x 17 x 7 cm

Regulatory Approval
CSA NRTL/C approved to CSA 107.2 and UL 1236