|
Charge Controller 60 Amps
|
A Controller for Virtually Any DC Charging Source
The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. All can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED.
All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
Product Features
Ensures your batteries are always charged
- Silent, pulse width modulated microprocessor control (maximizing battery life)
- Field adjustable voltage and battery set points
- Electronic protection against short-circuit, overload, over temperature and reverse polarity conditions.
| |
Electrical Specifications |
| |
Voltage Configurations |
|
12 and 24 VDC |
| |
Max. PV Open Circuit Array Voltage |
|
55 VDC |
| |
Charging / Load Current (at 25 °C) |
|
60 amps DC |
| |
Max. Peak current |
|
85 amps |
| |
Max. Voltage Drop through Controller |
|
0.30 volts |
| |
Typical Operating Consumption |
|
15 ma |
| |
Typical Idle Consumption |
|
3 ma |
| |
Recommended Breaker Size |
|
60 amps rated at 1000% continuous duty |
| |
Recommended Wire Size |
|
#6 AWG rated at 90 °C |
| |
Lead Acid Battery Settings |
|
Adjustable |
| |
NiCad Battery Settings |
|
Adjustable |
| |
Load Control Mode |
|
Low Voltage Reconnect - Adjustable (sticker provided with unit) all models |
| |
|
|
Low Voltage Disconnect - User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a one time, user selectable grace period) all models |
| |
General Specifications |
| |
Specified Temperature Range |
|
32° F to 104° F (0° C to 40° C) |
| |
Enclosure Type |
|
Indoor, ventilated, powder coated steel with 3/4" and 1" knockouts |
| |
Unit Weight |
|
|
| |
Shipping Weight |
|
|
| |
Dimensions (H x W x D) |
|
|
| |
Shipping Dimensions (H x W x D) |
|
|
| |
Mounting |
|
Vertical wall mount - indoor only |
| |
Altitude - Operating |
|
15,000' (4,572 m) |
| |
Altitude - Non-Operating |
|
50,000' (15,240 m) |
| |
Warranty |
|
Two years |
| |
Part Numbers |
|
C5, C40, C60 - Controllers |
| |
|
|
CM - Front Display Panel |
| |
|
|
CM/R-50, CM/R-100 - Remote Display Panel |
| |
|
|
BTS - Battery temperature sensor |
| |
Features & Options |
| |
Regulation Method |
|
Solid stage, three-stage (bulk, absorption, and float), pulse width modulation |
| |
Field Adjustable Control Setpoints |
|
Two user adjustable voltage setpoints for control of loads or charging sources - setting retained if battery is disconnected |
| |
Display Panel |
|
CM, CM/R-50, or CM/R-100 - optional LCD - backlit, alphanumeric display showing battery voltage, DC amperage, cumulative amp hours, and amp hours since last reset - remote includes 50' (15 m) or 100' (30.5 m) cable |
| |
Equalization Charge |
|
User selectable manual or automatic equalization - every 30 days |
| |
Battery Temperature Sensor |
|
BTS - optional remote battery temperature sensor for increased charging precision |
| |
Regulatory Approvals |
| |
UL Listed to UL 1741 - 1999 and to CSA 22.2 No. 107.1-95 Standards, CE compliant |
| |
| Note: Specifications subject to change without notice. |
| To compare models, please download the Product Data Sheet. |
|
Price: $199.00
Buy Product Online | Visit Store Home
|
|
|
Manufactured by Xantrex |
|
|
|
|
Other Items from Marine Inverters
Prosine 1800 - 12 Volt input, 1800 Watt, with GFCI AC Outlets
Battery Temperature Sensor - 25' - Battery Temperature Sensor - 25'
Prosine 1800/24 - 24 Volt Input, 1800 Watt, with GFCI AC Outlets
PROsine 3.0 kW/24 Volt - 24 Volt DC Input, 3000 Watt, 60A Charger with ACS Remote
Prosine 1000 24 volt - 24 Volt Input, 1000 watt, With GFCI AC Outlets
Prosine 1800 HW/TR - 12 Volt Input, 1800 Watt, with AC Hard Wire and Transfer Switch
Prosine 1000 HW/TR - 12 Volt Input, 1000 watts, With Hard Wire and Transfer Switch
Prosine 1000 - 12v Input, 1000 Watts, with GFCI AC outlets
PROsine 2.0 kW with Dual GFCI Outlets - 12 Volt DC Input, 2000 Watts, 100A Charger With AC Hard Wire, Dual GFCI Outlet, Temp Sensor and LCD Remote
PROsine 2.5 kW 24 Volt - 24Volt DC Input, 2500 Watts, 50A Charger with Standard Remote
PROsine 2.5 kW - 12 Volt DC Input, 2500 Watts, 100A Charger with Standard Remote
|
|
Return To Power Inverters Xpower Portable Power Xantrex Inverter
|
|
|
|
